Skip to main content

Is there any way to set different volume output level of iPod, USB, Phone or change the Microphone sensitivity on Gateway Blue?

In case of Gateway Blue the default (factory) volume setting can be changed via a USB flash drive:

Follow the steps below to change the volume settings:

1. Update the Blue firmware to 0007 at first. The firmware can be downloaded from here

2. Download the Gateway_Blue_Vol_config.zip file to your computer

3. Extract and copy the appropriate file (lcu_CFG.bin) to the root of a USB flash drive where you have one mp3 music at least, then connect it to the Gateway Blue

4. The file will be recognized automatically (installation takes maximum 10-20 seconds, when finished the first song will be audible via the car stereo)  by Gateway Blue and the new volume will be set. Configuration file will be deleted by Gateway after its execution

5. Turn the ignition OFF, remove the car key and wait 1 minute. After 1 minute turn everything ON and test the device with the new setting

6. If the setting is not correct, please change the value and test the new setting again

If you need any further help, please open an e-support ticket